GA SUB1541-B

Description

Product Overview:
Array Column-Ultra Low Speaker Combo Set SUB1541.
The design is designed to meet the needs of various indoor and outdoor speech and performance applications, especially to complement the application of CLP series products in performances. Two mounting designs that can be installed individually or combined with the SUB15-ALK support system are suitable for use in a variety of indoor locations. It can provide clear and transparent voice reproduction and accurate projection angles, and perform excellent low-frequency diving effects and low-frequency radiation energy.
Features:
CLP4401BF full-range speakers adopt a streamlined design, a unique curved appearance patent, beautiful and practical appearance, and beautiful sound quality.
CLP4401BF full-range speakers are stacked vertically by four 4-inch woofers, which are diverted up and down for greater low-frequency dynamics. The treble uses a 34mm horn treble, and the high-frequency performance is more energetic.
High-performance array columns provide excellent sound reinforcement for complex environments with high natural reverberation coefficients, echoes, and architectural barriers in language and musical listening spaces.
Full Range Sound Column Parameters:
Unit specifications: bass 4×4″, treble 1x34mm horn treble;
Rated impedance: 4Ω;
Rated Power: 250W (1000W, PEAK)
Characteristic sensitivity level (1m/1W): 94dB;
SPL in the specified frequency band: 115dB;
Effective frequency range: 80Hz-20kHz;
Diffusion angle: 120° horizontally, 40° vertically;
Housing material: plywood;
Shell paint: ordinary paint;
Grille Material: Iron;
Connection: crimping terminal;
Mounting system: adjustable angle bracket or wall fixed angle wall mounting bracket or combined floor installation;

Ultra-low technical parameters:
The panel has a volume control knob and an application scenario call button, and supports four application scenarios to select and call;
DSP channel: two-in, two-out matrix;
DSP inputs: dynamic expansion, delay, 16-segment PEQ, high pass, low pass;
DSP output: compressor, delay, 8-band PEQ, high pass, low pass;
Support input and output channels for grouping and quickly adjust parameters;
Circuit Type: CLASS-D;
Rated power (@1kHz): 1x800W@8 Ω+1x300W@8 Ω;
Frequency response (1W/8Ω): 20Hz-25kHz (±0.5dB);
Intermodulation distortion (20Hz-20kHz, half power): ≤0.1%;
Total harmonic distortion + noise (THD+N): <0.1%@1kHz; Phase response (20Hz-20kHz, 1W/8Ω): ≤±1.5°; Noise ratio (A-weighted, rated power, 8Ω): >110dB;
Input impedance: 10KΩ (unbalanced), 20kΩ (balanced);
Damping coefficient (1kHz/8Ω): 800;
Slew rate: ≥60V/us;
Input Sensitivity (1kHz/8Ω): 1V;
Audio Input Interface (INPUT): 1 XLR (QAN) female socket;
Audio Output Interface (LINK): 1 XLR (QAN) male;
Control interface: 2xRJ45 (RS485 protocol), can connect multiple speakers hand in hand to achieve cascade control;
Power output interface: 1 NL4 socket (+1/-1), which is the parallel output of the 1x300W@8 Ω amplifier channel;
Protection function: over-current/over-temperature/overload/load short-circuit protection;
Cooling system: natural convection cooling;
Power supply: AC220V/50Hz, 1 input, 1 cascade output, factory standard 1.5m national standard power cable;
Unit Size: 1×15″;
Rated impedance: 8Ω;
Rated Power: 500W (2000W, PEAK)
Characteristic sensitivity level (1m/1W): 102dB;
SPL in the specified frequency band: 126dB;
Effective frequency range: 40Hz-500Hz;
Housing material: plywood;
Shell paint: ordinary paint;
Grille Material: Iron;
Minimum dimensions (height×width× depth): 1820x595x600mm;
Maximum dimensions (height×width× depth): 2170x595x600mm;
Product net weight: 43.6kg;
Package weight: 50.2kg
Package size: 90*66*87.5cm